Bamboo Topcoat Plywood Lacquer 1L

1. The bamboo surface should be sanded, clean, dry and free of grease. Uprising bamboo fibers can be prevented by moistening the bamboo panel with a damp cloth prior to applying the first coat. This method generally avoids the need for intermediate sanding before applying the second coating. Intermediate sanding with P120 sandpaper is not necessary for adhesion, but can provide s smoother finish.
2. Do not dilute as this may disrupt the precise balance of ingredients.
3. Use a roller or a long-haired brush for the application of Bamboo Topcoat. Only use tools with stainless steel or plastic parts. Clean tools with water. Dried product can be dissolved with acetone.
4. Distribute the lacquer into uniform bands or sections across the bamboo surface and try to avoid differences in layer thickness. It is important to apply a rich coating of Bamboo Topcoat (first coating at approximately 8 m2 per liter, and the second coating at approximately 10-12 m2 per liter). A rich coating ensures better flow and a better distribution. With 3 coatings you will obtain full protection.

Drying times are valid at 20°C, 65% RH, said consumption and adequate ventilation. A lower temperature and / or higher RH can significantly slow down the drying process. To prevent defects always wait before applying the next coating until the previous coat is sufficiently dry. Do not cover the finished surface with cellophane, carpets, or other coverings for the first two weeks. Only clean with dry cloth during this period.

• Dry to the touch after ± 15 min
• Tack-free after ± 30 min
• Time before repainting ± 16 hours

Do not use Bamboo Topcoat at temperatures below +10°C, above +30°C, and / or at a relative air humidity of more than 85%. The temperature of the surface should be at least 3 degrees °C above dew point. Protect from direct sunlight and provide adequate ventilation to remove vapor during drying.