Black Bamboo Fence Roll Half Round Deluxe 180 x 200 cm

Always try to leave a minimal 2 cm space between a bamboo fence and the ground to avoid direct contact with wet soil as this might cause black stains over time. You could rest the fencing roll on a wooden plank while installing to fence.

1. To install a half round bamboo fence roll against an existing wall or wooden fence, drill 4 mm holes through the bamboo poles with our special 4 mm bamboo drill bit. Do this every 20 cm or so in horizontal direction and fasten the bamboo fence with 4 x 50 mm screws. Repeat this toward the top, middle and bottom of the fence for maximum stability. Do not use excessive force when tightening the screws to avoid damaging the bamboo poles.
2. Installing a bamboo fence roll against a chain link fence is achieved by using double loop wire ties or tie wraps. Wrap the wire ties around the galvanized steel wire that runs through the bamboo poles and tighten them to the metal chain link fence. 

Adjusting the size of a bamboo fence roll

• A big advantage of bamboo is that it is easy to work with. You can simply adjust the width of a bamboo fence roll by unfolding the galvanized steel wires at the sides of the roll. Pull out as many poles as you need and fold the steel wires back into place, done!
• To adjust the height of the fence you can trim the bamboo poles with a fine teeth saw blade. For the perfect result you may also want to wrap strong tape around the bamboo poles before cutting them to size in order to avoid frayed cut-offs.