Reed Fence Roll 600 x 100 cm

We recommend installing a reed fence at least 10 cm from the ground to avoid direct contact with wet soil and to maximize its durability. Rest the fencing roll on a wooden plank while installing the fence for example. 

1. You can easily secure a reed fencing roll against an existing wall or fence with our special 3.5 x 25 mm fastening screws. Place the screws between the reeds and fasten the screw so that the washer is pressing the reed stems against the wall. Do this every 20 cm or so in horizontal direction and repeat this toward the top, middle and bottom of the fence for maximum stability. 
2. Installing a reed fence roll against chain link fences or mesh panels is achieved by using galvanized wire ties or tie wraps. Wrap the double loop galvanized wire ties around the steel wire that runs through the reed fencing roll and secure them to the metal fence.  

Adjusting the size of reed fencing rolls

• A big advantage of reed is that it is easy to work with. You can simply adjust the width of a reed fence roll by cutting the galvanized steel wires at the desired width with pincers. 
• To adjust the height of a reed fence you can easily cut the stems at the desired height with pruning shears.

• A reed fence roll is a natural product, therefore its dimensions can slightly vary. This also applies to its density / see-through.
• The minimal durability of reed fencing (outdoor use) is 3-5 years. To extend its service life use Bamboo Booster which is a natural oil that nourishes and maintains natural fences.